I-rig yokuqhuba iRig KR50

Inkcazo emfutshane:

Intloko ye-drive ye-drive, enendawo ephezulu yokufikelela kwi-100kn.m, ukuqinisekisa ukusebenza okunamandla kunye nefanelekileyo.
Ukwandiswa kwe-chassis (ububanzi bexeshana), apho ububanzi obusebenzayo buyinto enomtsalane wama-3600mm kwaye ububanzi bezothutho kukulawulwa kwe-2600mm. Esi sixhobo asibonakalisi kuphela ukunyanga okuhle kodwa sibonisa uzinzo oluphezulu, sikwenza ukuba sisebenze kakuhle kwiimeko ezahlukeneyo.
Ubunzulu bokuphembelela ubunzulu be-16m, kwaye kukufumana ukwakhiwa kweedayam ezinkulu kwizixhobo ezahlukeneyo zokuqhuba kunye neendlela zokwakha, ukubonelela ngokuguquguqukayo kunye nokuziqhelanisa nokuzonwabisa.
Ibonisa intletyelezo ephezulu yokuhamba, kwaye lonke umatshini uguquguquka kakhulu kwaye unokuhlangabezana ngokulula nemfuno ye-20 ° ramp ye-ramp yokuqhuba eqhelekileyo, iqinisekisa intshukumo engenamthungo nakwiindawo ezineminye.
I-chassis iqinile, ineziko eliphantsi lomoya, iququzelela intshukumo elula kwimigama emifutshane kunye nokuqinisekisa uzinzo ngexesha lokusebenza.

Iinkcukacha zemveliso

Iimpawu zeMveliso

Inkcazo yobugcisa

Inkcazo yobugcisa	Iyunithi
Max torque	KY.M	I-110
UMax. ububanzi	mm	1200
UMax. ukuntywila ubunzulu	m	20
Isantya sokujikeleza	i-rpm	7-30
UMax. uxinzelelo lwabantu	kN	76
UMax. Isihlwele satsala	kN	90
I-winch ye-winch ye-winch	kN	65
Isantya se-winch esiyintloko	m / min	48
I-Auxiling Winch Line	kN	20
Isantya somgca we-Winch Winch	m / min	38
Ukubetha (inkqubo yezihloko)	mm	I-1100
I-SAMST STOPTION (kamva)	°	± 6
I-SAMS ATTNTNTNATE (ngaphambili)	°	3
I-SAMIT YOKUTHENGA (Buyela umva)	°	90
UMax. Uxinzelelo olusebenzayo	mpa	34.3
Uxinzelelo lwePilot	mpa	3.9
Isantya sokuhamba	km / h	5.6
Amandla eRhafu	kN	I-220
Ukuphakama kokusebenza	mm	I-10740
Ububanzi obusebenzayo	mm	2600
Ukuphakama kwezothutho	mm	3040
Ububanzi bothutho	mm	2600
Ubude bothutho	mm	I-12500
Ubunzima ngokubanzi	t	28
Ukusebenza kwenjini
Imodeli ye-injini		I-cumminsqsb7
Inombolo ye-cylinder * i-cylinder diemeter * stroke	mm	I-6 × 107 × 124
Ukufuduswa	L	6.7
Amandla aMandla	kw / rpm	124/2050
UMax. Itota	NM / i-rpm	I-658/1500
Umgangatho wokukhupha	U..S.SEEEE	Tier3

I-KElly Bar	I-farions kelly bar	Ukudlulisela ibha kaKelly
Ngaphandle (mm)		Φ325
Icandelo * ubude ngasinye (m)		4 × 5.5
Ubunzulu bobunzulu (m)		20

Iinkcukacha zemveliso

Iifoto zokwakha

I-kr50 yokuqhuba i-rig ye-rig yeProjekthi yokuFubisa

Njengoko umlambo uxakekile, ukwakhiwa kufuneka kuqinisekiswe ukuhamba nokuhamba okuqhelekileyo kwezinye iinqanawa ezinye.

Umkhenkce wokwakha:
I-SALL, COOT, iLitye eliqinileyo leMozulu
Ubunzulu bokuqhuba: 11m,
Ububanzi beDriling: i-600mm,
Imizuzu engama-30 yomngxunya omnye.